FIPBox-MultiCom-M4
This mini-chassis allows communication with the FIP network, the addition of I/O cards can transform the system into a PLC
Description
Data sheet
Function : gateway / IO
Co-processor : PowerFIP
Supply : 24/48V
Design : recent
.
.
1 - Hardware
.
This compact, Half PXI (150H*110D*105L mm) and robust chassis allows communication with the FIP network. Like a PXI chassis, cards can be easily swapped to establish a different configuration.
It mainly consists :
A - A Power/Communication card
The card has a 24/48V power supply connector, a relay contact for correct operation, an Ethernet connector for interoperable communication (Modbus planned), a mini USB connector for programming.
The communication card is based around the ARM microcontroller component: STM32H747XIH6, the system works without O.S.
.
B - A FIP card
Available in 2 standardized versions of the WorldFIP FIP bus ( 1Mbits/s or 2.5 Mbits/s).
Din rail or table mounting.
.
2 - Software part
.
/
.
4 - Guarantee
.
5 years
.
4 - Quotes, developments
.
For commercial or technical questions, "customized" functions, please fill out the form below:
1 - Characteristics
.
Size : 150(H)*110(P)*105 (L) mm
Material: Stainless steel body, Aluminum flanges
Supply Voltage: 24..48 VDC
Processor: Dual-core ST STM32H747XI Processor
Program Memory: 1MB of RAM
Flash Memory: 2MB
Flash QSPI: 16MB, manufacturer's internal usage + data logging
Programming method: C/C++
USB Connectivity: Host and Device operation, Programming/Flashing, Power delivery for programming
Communication: Ethernet, WorldFIP Fieldbus
RTC: A 1F supercapacitor provides power to the STM32H7 when the board power supply is disconnected. NTP sync through Ethernet
Security: ATECC608B Crypto Microchip
The following statistics are only displayed on your client account