FiWiP Gateway FIP - Ethernet

  All FIP frames are sent over the Ethernet network

  Security: unidirectional, transparent module on the FIP network

  System control via Webserver

  Wireshark Dissector

  LifeSign data sent over Ethernet

  Wifi, 4G, GPS

  Card design: recent

  Supplied with FIPWatcher spybus software to receive frames on a remote station

  Power supply: 9/36V  or 72V/110V

  Ibase MPT-3000R : EN50155

.

1 - General descritpion

.

FiWiP is a compact system including the FIPWatcher mPCIe spybus card, it allows sending all FIP frames to Ethernet UDP and receiving them on a remote station.

The system is "transparent" on the network so as not to disrupt the FIP / WorldFIP network. This version is uni-directional.

Optional WiFi and GPS

The Bi-directional version  is accessible via the FIP-OPC UA module or the OPC UA over TSN module and the FIP arbiter mPCIe card.

.

2 - Hardware

.

For the FIP/WorldFIP part, the system consists of an mPCIe card and a monomedium speed card with 2 SUB-D9 to connect to the FIP/WorldFIP network. The card FIP  is inserted into the embedded system GW7100/7101 ( IMX 8), NXP™ i.MX8M Mini Quad Core 1.6GHz ARM® Cortex™-A53

.

3 - Software

.

The FiWiP system comes with FIPWatcher sotware

.

4 Operating modes.

.

Very easy to use, just connect it to the FIP network and Ethernet network and then connect the power supply, without any configuration, FIPWatcher detects and displays the FIP frames circulating on the network on a remote station.

FiWiP behaves like FIPWatcher protocol analyzer, very useful for developments on a desktop or for on-site maintenance. It displays all the frames circulating on the network, with many features.

Using a web server (Webmin for example), WEB interface for remote system administration, the user can configure the FIP UDP service, configure the system time, etc.

In installations, FiWiP uploads all FIP frames on Ethernet, encapsulating other "comfort or life" data (of the FiWiP module) such as temperature, memory or processor utilization rate, etc. See all data LifeSign could be sent...

The remote equipment receives the UDP frames, to decode them there are several possibilities:

- Use HMI FIPLabs

- Use Wireshark dissector

- Customer integration

.

5 - Modules included in the package

.

Service FIP UDP daemon

Wireshark dissector plugin: FIP frame dissector, packet visualization, filtering tools

FIPWatcher software

All technical information, configuration and installation on our WIKI 

.

.

6 - Quotation, special development, discount for quantity...

.

For an estimate, discount for quantity, a particular development, please fill in the form below.

.