.
.
Videos / tutorials
.
Introduction
.
On this page you will find tutorial videos on our company's products. They provide a demonstration or step-by-step instructions on how to install/configure/use a product or software.
Note: the videos are fast so as not to be too large. Please use the pause key at your convenience.
Experienced users can go to our Wiki site via the link, for technical information for installation/use or software programming.
.
1 - FIPWatcher spybus
FIPWatcher spybus is a very easy-to-use bus analyzer that displays all frames circulating on the FIP/WorldFIP network. In seconds and without configuration, you can get FIP traffic
 |
 |
.
.
.
1-1 Install FIPWatcher drivers
This video shows how to install device drivers for Windows 10/11 with FIPWatcher Thunderbolt4/3 or FIPWatcher PCIe low profile hardware
1.2 - First acquisition of WorldFIP frames with FIPWatcher
This video explores the different segments of the FIPWatcher HMI, the following part of the video is devoted to the first acquisition of frames on the FIP/WorldFIP.
The video also discusses mnemonics using the PowerFIP development station (STM32 communication) with the Nucleo H755ZI, and the 1KS01A3 card with its numerous sensors (accelerometer, temperature, gyroscope, magnetometer, pressure, etc...)
.
2 - FIPCapture spybus
The FIPCapture library is a C/C++ API providing a programming interface for integrating FIPWatcher functions into a client application. Dll Provided with the acquisition of a FIPWatcher.
|
|
2 -1 Opening the examples provided with FIPCapure
This video shows how to install the drivers for FIPCapture (Thunderbolt 4/3 or PCie LP). It uses the examples provided for a first acquisition of the FIP / WorldFIP network
.
3 - PowerFIP API
PowerFIP is the scalable version of FIP /WorldFIP, with available components replacing FullFIP2, Fieldrive, Fieldual, MicroFIP components, and FDM Dlls...
|
|
3- 1 Installation of PowerFIP drivers
How to install drivers for cards equipped with PowerFIP coprocessors (PCie, PCIe, PCI, mPCIe, MobiFIP Thunderbolt)
OS : Win 7 to Win 11
.
3-2 Opening the examples provided PowerFIP
This video shows how to use the examples provided with the PowerFIP API (for FIP/WorldFIP equipment: PCie, PXie and MobiFIP Thunderbolt 4/3).
Speed 1 Mbit/s and 2.5 Mbit/s, check the network with FIPWatcher spy bus.
.
4 - GOFIP optical repeater
GoFIP is an optical network repeater using the FIP/WorldFIP stack, it is compatible with FIP/WorldFIP and FIPIO, FIPWay variants. Bus speed 1 Mbit/s and 2.5 Mbit/s. Distance up to 150 km (SFP limit) and more using GoFIP repeaters.
|
4-1 GoFIP test over a distance of 150 km
Using the FIPKIT development kit to generate a FIP/WorldFIP network.
This video shows the configuration of the example files provided with PowerFIP, then testing the GoFIP repeaters over a distance of 150 km via optical fiber. The first station is Master, the second is Slave.
.
5 - Tests 5 PXIe FIP cards
PXie FIP cards are used to form a FIP/WorldFIP network, the cards use the PowerFIP co-processor (Replaces FullFIP2) and can Master/Slave.
|
|
5-1 Test 5 PXie FIP cards
This video shows the testing of 5 PXie FIP cards in a National Instrument chassis, under Win10, and the examples provided with PowerFIP API.
2 PXie FIP cards to form a 1 Mbit/s network
2 PXie FIP cards to form a 2.5 Mbit/s network
1 single card 1 Mbit/s